About B A

B A · 06-02-2023

Hello all,we recently received 2x Cisco C9124AXE and we need to use them for a point-to-point wireless bridge between two buildings as shown in the image. How can we configure them? They are brand new, I didn't convert them to any mode or EWC... I am...

B A · 05-09-2022

Please delete

B A · 05-11-2021

Hi, I am going to disable low data rates on WLC:802.11a (6,9,12,18)802.11b (1,2,5.5,6,9,11) And I have two questions. We have hundreds of devices and checking the data rates on each of them individually is impossible. Is there any way to see which de...

B A · 05-07-2021

Hello, I have basic knowledge of FlexConnect and when it's used - branch offices and remote sites. Recently I've been told by some auditors that we should configure FlexConnect in our local network to increase wireless speed and quality. I've never h...

B A · 10-15-2019

Hello.This is what happens. Recently we replaced and connected 45 new AIR-AP1852I-E-K9 APs to non-PoE switches. However, we used TP-Link Power adapter to power all APs so WLC showed "PoE/Medium Power". To solve this we bought Cisco PWRINJ6 power inje...

B A · 06-18-2023

Thank you! Where can I configure it?

B A · 06-14-2023

...

B A · 06-14-2023

The problem is that when I disconnect C9124_B from the ethernet, I cannot reach the AP over the bridge. These APs do not see each other as mesh neighbors.

B A · 06-13-2023

Yes, 192.168.1.203 is the IP address of EWC.

B A · 06-13-2023

Does this output tell anything?

Member Since	‎12-02-2018 11:03 PM
Date Last Visited	‎06-07-2023 12:03 AM
Posts	82
Total Helpful Votes Received	1

User Statistics

User Activity

Wireless bridge between two C9124AXE

Please delete

WLC Data Rates

FlexConnect in a local network

Cisco APs Randomly Reboots

Re: Wireless bridge between two C9124AXE

Re: Wireless bridge between two C9124AXE

Re: Wireless bridge between two C9124AXE

Re: Wireless bridge between two C9124AXE

Re: Wireless bridge between two C9124AXE