ArrowSIVAC
Level 1
Level 1
Member since ‎09-02-2008
‎08-18-2017

User Statistics

  • 19 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 1 Helpful votes Received

User Activity

Hardware: IBM BCH chassis with Nexus 4001i  pair of TOR 5010 with Fibre Bridge modulesIssue: Even with FIP showing MAC devies now for the blade slots, I am not seeing the FC devices show up for the MDS switch.Diagram: Question: In reading the deploym...
Nexus 5010Goal:  Upgrade from 5.0 to 5.1Downloaded images twice and upgrade went without error on my other 5010# install all kickstart bootflash:n5000-uk9-kickstart.5.1.3.N1.1.bin system bootflash:n5000-uk9.5.1.3.N1.1.bin<snip>Images will be upgraded...
Environment:IBM BCH blade in bay 12 with QLogic 10Gb Convergence adapter. CISCO Nexus 5010 (sw10) ports 3, 4 trunked via port group to BCH Chassis bay 7 ports 15, 16 port group.First time setting this up. Following the examples guide for the 4001i an...
Environment:IBM BCH ChassisCISCO Nexus 4001i switch bay 7Goal:Download latest version of NXOS to system.Issue.  I do not have any more 100Mb ports left to connect the managment dedicated external port for the swiches. I simply wish to utilize the bri...
Issue bringing up etherchannel aggregate.Goal:sw00 8/3-4 --> po1 ---> sw15 0/15-16****509**!interface Port-channel1 no ip address!<snip>!interface GigabitEthernet8/3 shutdown speed 1000 duplex full spanning-tree portfast channel-group 1 mode desirabl...
Community Statistics
Member Since ‎09-02-2008 10:45 AM
Date Last Visited ‎08-18-2017 03:50 AM
Posts 19
Total Helpful Votes Received 1
Helpful Votes From