Hi I need help with the below request ( ASA Firewall - ASA5510 - version 7.2(2)) Please allow the following UDP for outgoing only: No Type Port Usage 1 Local port 9443 Required for Agent local services 2 Local port 15011 No Protocol External host com...
Need help with below Firewall rule change request: Please allow the following UDP for outgoing only: No Type Port Usage 1 Local port 9443 Required for Agent local services 2 Local port 15011 No Protocol External host communications port Usage 1 HTTPS...
sh int gi 0/1 | inc erro 692945 input errors, 1 CRC, 0 frame, 692943 overrun, 0 ignored 0 output errors, 0 collisions, 0 interface resets customer reported Intermittent dropouts and slow speed on their MPLS linkscan anyone help me to troubleshoot th...
I have a customer issue with the ATM and Di1 interfaces keep flapping and when I looked at the log it says Configured from console by mypwd on vty0 I have attached the log below: .Apr 8 16:03:20.055 AEST: %LINK-5-CHANGED: Interface Dialer1, changed ...
Hi,I have one of my customers requested us to enable BPDU packets to send over between their L2 connection and later I have found BPDU filters are enabled. Therefore, I have deleted the BPDU filter from our (ISP) L2 path but still, they are advising ...
Hi Abhijeet,This is an inside_in request for the website to access from outside the network.I have completed this one thanks for the reply.Regards,Juliet,CCNA
Hi Mark,Carrier technician fixed the line fault at the exchange (fixed the jumpering at the MDF that was damaged due to corrosion )Thanks for your help and support all this while.Regards,Julie
HI Mark,I could only see default-router and router eigrpcouldn't see static IPsI have raised this concern with our upstream provider and waiting for their feedback.Regards,Julie
