About StevieC666

StevieC666 · 12-06-2022

Hi all, hoping that somebody out there might have seen something similar to what we're currently experiencing?Basically, we are seeing issues whereby clients are associating to a SSID configured for 802.1x, being authenticated successfully (ISE Polic...

StevieC666 · 10-25-2021

Hi all, I've posed these questions to our Cisco TSA but I'm he's a super busy chappy at present so figured I'd see if I could get an answer here ahead of a reply from him. Basically we have a critical requirement to be able to provide 'basic' VLANs (...

StevieC666 · 09-02-2021

Hi there, I'm hoping somebody could point me in the direction of some documentation that might help explain a few things? Basically we're running a DNAC 2.2.2.3 XL cluster with 9800-80 WLCs within one Fabric site with 1600 9130ax APs, 200+ 9300 switc...

StevieC666 · 01-16-2021

Hi all, I'm seeking views/guidance/advice on the importance of maintaining version alignment across the components that comprise the SDA solution. We're running DNA 1.3.3.6 on a three node XL cluster with ISE 2.6 patch 6 across two physical servers,...

StevieC666 · 06-14-2020

Hi all, long time reader asking first question. Be kind!  In the post : https://community.cisco.com/t5/networking-documents/vlans-used-in-cisco-dna-center-software-defined-access-solution/ta-p/3945667 it says: VLANs 3001-3500 - Used for Border Upli...

StevieC666 · 12-20-2022

Hi Rich, thanks so much for pointing us in this direction.We're currently running 17.6.3 so the bugfix note aligns perfectly. We've been guided by TAC to go to higher release for another issue we have related to RSSI value collection so we're going t...

StevieC666 · 10-26-2021

Thanks for the reply, everyday is a school day I can confirm that I was talking about the latter scenario where we want the flexibility of having the SVI for a given network not configured on a fabric edge but rather a device that's an endpoint or ...

StevieC666 · 05-26-2021

We've got six C9400s out there in our campus setups with over 300 C93k & C36k switches hanging off them. Each campus site has two border nodes. We've not connected the FEs which also double as inters together, they only have uplink connections to th...

StevieC666 · 05-11-2021

Hi Rob,We're working through a migration to SDA at the moment, we're essentially going from a single VRF to 5 VNs and of course we face the challenge that things can't be done at the speed to thought so we've needed to leverage co-existance in the fo...

StevieC666 · 03-03-2021

No problem, yes we're using the Closed Auth template. We've a load of other types of FE connected things that sadly we have to manually set the port config via GUI then CLI but fortunately phones just worked

Member Since	‎05-13-2019 04:01 AM
Date Last Visited	‎03-20-2024 12:30 AM
Posts	27
Total Helpful Votes Received	25

User Statistics

User Activity

Fab Mode APs - Wireless Client Authentication Sessions on switch int

L2VNI SW/HW Compatibility

WLC Provision Triggers

SDA Compatibility Matrix, recommended vs supported

SDA Reserved VLAN IDs

Re: Fab Mode APs - Wireless Client Authentication Sessions on switch i

Re: L2VNI SW/HW Compatibility

Re: Intermediate node deployment

Re: SD-Access L2 Handoff query

Re: SDA Default Voice VLAN