I've never noticed the "Lower your voice Alert". A user happened to find it. You can turn it off via the phone settings. I am trying to find out if it can be globally turned off. Also, when was this feature implemented. Not finding anything in ...
We are upgrading from 8.6 to 10.5. Ldap synchronization and authentication are enabled. LDAP Syncronization works just ine. LDAP Authentication works fine on 8.6 Call Manager, but fails on 10.5. The configuration in 10.5 mirrors the configuration...
We are in the testing phase for an upgrade to 10.5. I can successfully add pre-existing devices to CM. However, when I attempt to add a new 8851 I get "provisioned" error message
I verified the MAC address, configured the phone with a DN
We are u...
I am working through configuring new 4451-X routers to support voice. I have 1 pvdm in the NIM Card. This gateway has slots on the motherboard for the PVDM and a slot on the NIM. I have relocated the PVDM to the NIM.
My question is, when I enabl...
Hi Community.I have three numbers that I requested to have forwarded to another number via the Telco. Two of them work fine, one does not. The two that are working fine are linked to Extension Mobility Profiles. The problematic number is pointing ...
Is there a way to change the color settings? For instance, on an inbound call, the alert is highlighted in orange. Is that configurable? Same thing with the white highlights. Is that configurable?
I also had this issue. Event those the Cisco Tomcat Service said started, I would get the related error.
Turns out I just wasn't being patient. It came back 5 - 10 minutes after I noticed Tomcat had started.
I am also having this issue. I have gone through the deployment guide.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-cis...
