About sdonnelly41

sdonnelly41 · 03-08-2021

Recently switched my Firepower setup from the legacy AD connector to ISE 2.7.0.356. One issue I am running into is that for my laptop ISE is reporting a different user account from my login when I view Live Sessions. This is causing issues for me whe...

sdonnelly41 · 01-29-2021

Just unboxed a new UCS C220 M5SX and I was trying to log into the host and the passwords that are documented do not work. I have tried the following with the root account. Cisco, Cisco123, Cisco1234, Password (lower and upper on the first character) ...

sdonnelly41 · 01-04-2021

Hello folks! I am currently running a two node cluster for Call Manager, Unity, and IM&P. I will be purchasing new hardware in the near future. What's the best practice to go about migrating the existing VM's to the new hosts? My Cisco hosts are sepa...

sdonnelly41 · 09-13-2019

So we currently have 800 #'s that most of our customers use, these are translated on our 4300 routers using num-exp and a matching dial-peer to Call Manager. The DN in CUCM is set to forward to voicemail, which then goes to a System Call Handler. Tha...

sdonnelly41 · 08-30-2019

I've looked around a bit and have not been able to determine if there will be disruption in mail flow during the creation of a cluster? I currently run the ESA virtual appliance and I have the new VM up and running and I have met all the requirements...

sdonnelly41 · 01-29-2021

CIMC is working with the password I set, but the root password of password is not accepted and I can't change that since I am not able to access. I guess I am going to have to reinstall.

sdonnelly41 · 01-29-2021

Thank you for the response. Unfortunately that is not working, but to confirm I tried "password" and "password." without the quotes with no luck.

sdonnelly41 · 01-05-2021

Thank you folks! I will review and report back. Also for PCD do I need to deploy on both old and new hosts?Regards

sdonnelly41 · 08-30-2019

Perfect that makes sense and I believe I have everything I need now! Thank you very much!

sdonnelly41 · 06-05-2019

My existing dial-peer looks like this. I was wondering if I should change to this, dtmf-relay rtp-nte h245-alphanumeric h245-signal dial-peer voice 10 voippreference 2destination-pattern 4...progress_ind setup enable 3voice-class codec 100voice-class...

Member Since	‎07-08-2016 09:18 AM
Date Last Visited	‎03-26-2021 12:03 AM
Posts	37
Total Helpful Votes Received	20

User Statistics

User Activity

ISE Passive Identity Connector

BE6000M and ESXi root password not working

Migrate from BE6K to new BE6M

External Calls to DN set to forward, no ringback

Downtime when creating cluster?

Re: BE6000M and ESXi root password not working

Re: BE6000M and ESXi root password not working

Re: Migrate from BE6K to new BE6M

Re: Downtime when creating cluster?

Re: Unity Connection Call Handler and User Input