About HarrydenOuden7643

HarrydenOuden7643 · 09-20-2019

Hello, Am trying to setup a DMZ for a ASA 5506. At the moment we have 3 interfaces active on the ASA which are:gi1/1 outsidegi1/2 insidegi1/3 VoiceVoice has an internal ip with a pat on the outside interface with a public ip address from our range.No...

HarrydenOuden7643 · 10-01-2019

Also thanks for you help bhargavdesai, am now looking at the correct acl for http and https access. But that will be no problem.

HarrydenOuden7643 · 10-01-2019

Thank you Marius, that did the trick. I now have normal connection on the dmz host and now can apply the acl to let the outside in on the DMZ.

HarrydenOuden7643 · 10-01-2019

Hello Marius, Yes the sh conn detailed only shows connections on the outside to the voice and inside networks. NAT is correct on the voice and inside network on the sh xlate. sh mac on the uplink interface of the switch to the ASA interface is not sh...

HarrydenOuden7643 · 10-01-2019

I already have a TAC opened with our supplier, am waiting on their response. Behaviour is very strange because all interfaces from gi1/5 to gi1/8 are showing the same error. Only gi1/4 will come to a up up state but will not communicate with the swit...

HarrydenOuden7643 · 10-01-2019

Yes nameif DMZ and security-level 20. Removed the configuration on the old interface and shut it down. Did a no shut on the new interface and it stays down down.

Member Since	‎09-20-2019 07:32 AM
Date Last Visited	‎10-25-2019 12:54 AM
Posts	20
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco ASA 5506 DMZ setup

Re: Cisco ASA 5506 DMZ setup

Re: Cisco ASA 5506 DMZ setup

Re: Cisco ASA 5506 DMZ setup

Re: Cisco ASA 5506 DMZ setup

Re: Cisco ASA 5506 DMZ setup