A quicq question: Is it possible to have supplementary services such as hook-flash call forward on analogue phones connected to FXS ports without using a call agent such as CallManagwer or CME. Basically I set up a dial-peer to the FXS port and can make calls, but cannot transfer calls. Do I need a call agent? Regards, Marcus ... View more

Hi Setting up a modem to dial into on the AUX port has been a nightmare. I have the following configured on R1: line aux 0 password cisco login modem inout speed 115200 flowcontrol hardware transport input all modem auto configure type default I then have to reverse telnet to the modem, this being necessary for a remote dialin to connect to the aux port. However, when I dialin from a remote pc using the normal Microsoft dial-up connection, I get a black window with a blinking prompt but I'm unable to type in window. If I enter a command in the window, I can see it being entered into the modem of the AUX port. If I click the button called DONE on this screen, it gets stuck on "verifying username and password". The reverse consol session then shoots out garbage characters and connection drops. All I want is a simple out-of-band dialin to connect to a remote router. I have spent 2 valuable days on this and gone through all documentation. Is it my dial-up connection or the modem (the modem is a standard 56k V.92/V.90 with NO dip switches only software switches). The only AT command I've used is the at&f1s0=1 I simply cannot get hold of a USRobotics modem in this country. I have tried connecting at 9600 but that doesn't work. Help please Marcus ... View more

I have integrated Unity Express 3.2 and CallManagger 6(1). JTAPI is working as are my CTI route points and cti ports and everything is registed, however, I cannot get the MWI working. I have created a seperate port for the MWI in CCM. Below is the UE setup: se-192-168-1-3# show ccn subsystem jtapi Cisco Call Manager: 192.168.1.10 CCM JTAPI Username: jtapiuser CCM JTAPI Password: ***** Call Control Group 1 CTI ports: 5001,5002,5003,5004,5005,5006,5007,5008 Call Control Group 1 MWI port: 8000 CSS for redirects from route points: ccm-default CSS for redirects from CTI ports: redirecting-party ... View more

I have setup my sip dial-peer with g711ulaw codec pointing to my UE. Created ipunnumbered and route to AIM module, but I cannot dial the voicemail pilot number, I get an unknown number and busyout signal. I'm using CME 4.2 and CUE 3.2.1. I have never had this problem before, all I did was upgrade the mailbox licenses. What am I missing here? HOMESTEAD#debug ccsip messages SIP Call messages tracing is enabled HOMESTEAD# *Oct 20 22:45:30.545: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: Sent: INVITE sip:5000@10.60.14.130:5060 SIP/2.0 Via: SIP/2.0/UDP 10.60.14.129:5060;branch=z9hG4bK22BB5 Remote-Party-ID: "Bernaddette Cad" <sip:8100@10.60.14.129>;party=calling;screen=no;privacy=off From: "Bernaddette Cad" <sip:8100@10.60.14.129>;tag=80C3C8-12C6 To: <sip:5000@10.60.14.130> Date: Mon, 20 Oct 2008 22:45:30 GMT Call-ID: A1BFC8AF-9E2F11DD-80F9ADCB-217771CF@10.60.14.129 Supported: 100rel,timer,resource-priority,replaces Min-SE: 1800 Cisco-Guid: 2704420247-2653884893-2163518923-561476047 User HOMESTEAD#-Agent: Cisco-SIPGateway/IOS-12.x Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER CSeq: 101 INVITE Max-Forwards: 70 Timestamp: 1224542730 Contact: <sip:8100@10.60.14.129:5060> Call-Info: <sip:10.60.14.129:5060>;method="NOTIFY;Event=telephone-event;Duration=2000" Expires: 180 Allow-Events: telephone-event Content-Type: application/sdp Content-Disposition: session;handling=required Content-Length: 191 v=0 o=CiscoSystemsSIP-GW-UserAgent 3425 8750 IN IP4 10.60.14.129 s=SIP Call c=IN IP4 10.60.14.129 t=0 0 m=audio 19394 RTP/AVP 0 c=IN IP4 10.60.14.129 a=rtpmap:0 PCMU/8000 a=ptime:20 HOMESTEAD# Marcus ... View more

I have a requierment where usesr are not allowed to dial any number other than a 4-digit speed-dial in a bulk speed-dial list on CME 4.1. Is there a way to restrict this? Example, 1700,112341234. The user may only dial the 1700 speed-dial and no other digits. Please help, they could do this on PBX. Thanks, Marcus ... View more

Lately, on CCM 6.0, whenever I create an extension mobility user, and the user logs into the phone, the phone logs in with the device profile, however, the extension will be unable to receive calls and/or make calls. In CCM, under phone, I can see the user logged in with her profile, but under the line it still shows the auto extension used for auto registration. This has only started happening recently. I will then have to manually remove the auto registration extension from the line button and leave it blank, only then, after a while will the user be able to make calls. For some reason, the users device profile is not associating with the phone line in the CCM and this is causing unexpected issues. What is going on? Will restarting the extension mobility services solve the issue or maybe a reboot of the cluster and patching? ... View more