To whom it concerns,
I have the following topology;
Two WAN circuits terminated on two separate Cisco routers R1 & R2.
Physically the LAN consists of 6 switches, switch 1 connects to switch 2 connects to switch 3 connects to switch 4 connects to swi...
Dear Cisco experts,
I'm rolling out QoS on a WAN network. On the LAN facing interface of a 3845 router I need to police and mark traffic from the LAN. I tried adding two separate service policies to the interface but this was rejected.
So my questio...
Hi,Im deploying a cisco network whereby a pair of 6509 switches running VSS act as a collapsed core terminating seperate access switches for data, voice and wifi on separate layer 2 port channels.A wan router connects to the core switch and onwards t...
Hi all,two queries I cannot find an answer for: 1. is the SFP-10G-LR compatible with the ASR 1002 router? 2. And if so, can it run at 1gig or is it just fixed at 10gig? Thanks, Paul
Hi all,is there a way of extracting a list of hostnames ( for devices in EMEA ) and their associated serial numbers from Cisco Prime and into say a csv file? Many thanks, Paul
Hi and thank you for the reply.
the ISPs are not sending a default route here. The closet thing to that is:
*> 10.0.0.0 10.x.x.14 0 19855 65529 65099 65170 ?
Is there a work around here to achieve dual-home failove...
Thanks for your reply,any tips on how to configure VRFs for the 6500s? I've never done so before. Also,the way we implement QoS normally is all on our edge Router as follows (see attached diagram): Marking the voice packets:class-map match-all Mark_V...