Cam,If the cop.sgn install fails again, collect the "Event Viewer-System Log" and "Install and Upgrade Logs" via RTMT covering the time of the installation and upload them to your TAC SR.  Then send an email to ibm-fs-failure@cisco.com indicating suc...

Cam,Please try step 2a (boot from CUCM recovery CD to run filesytem check).Boot from the CUCM recovery disk and select option f to check the filesystem.    If you do not have a recovery disk you may download the ISO from the Software Center on cisco....

Bad news.  While applying the cop.sgn file it completed on step 14 of 20 (that's a big problem).  The system went into read-only mode <ARG>.  I had already applied the firmware upgrade as the cop.sgn file wasn’t there when I downloaded the .iso file ...

Cam,Thanks again for providing your 2GB USB key finding!  Step 1b has been updated with this recommendation.  I also sympathize with your frustration regarding this issue.  Please rest assured that this issue is top-of-mind and focus for many Cisco r...

I have completed 1b successfully and have the log file.I also applied the firmware update that was made available and it now shows that I'm running firmware revision 3B06 instead of 3B05.The system is running and we'll see how long it runs before it ...