Amit Singh

Amit Singh · 01-15-2007

Raj,I slightly disagree with you on this.If the switch is in VTP client state and it has a higher re...

Amit Singh · 01-15-2007

It depends on the contract that you have on the router and also on the image that you are upgrading ...

Amit Singh · 01-15-2007

Henk,Look for static route tracking:http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_...

Amit Singh · 01-15-2007

Hello,Please see the answers:1. S4KL3- 12220EW is standard image with has basic routing like RIP and...

Amit Singh · 01-12-2007

Dave,Please go ahead and upgrade the rommon on the switch to eliminate any future incompatibility.HT...

Amit Singh · 01-12-2007

Yes you have to go for a VLAN.Vlans are the means of logical isloation at layer2.In case of a physic...

Amit Singh · 01-12-2007

I think there is an error in the documentaion.One of my customer is running 5 of those in 4507R in t...

Amit Singh · 01-12-2007

Please paste a rough network diagram and will be able to help you in designing the optimum solution....

Amit Singh · 01-12-2007

In a LAN environment to use multicast effectively you can use either of the following methods:1. GMR...

Amit Singh · 01-12-2007

Please have a look at the link below.Go through it and it should help you find out the exact problem...

Amit Singh · 01-12-2007

Hello,The situation is slightly complicated here as you have 3 links, 2 from one provider and 1 from...

Amit Singh · 01-12-2007

Hello,As you are changing the network scheme at the remote office and want the internet access from ...

Amit Singh · 01-12-2007

Untill and unless you have some device connected on the switchport the interface will not come up an...

Date Registered	‎03-19-2006 09:46 PM
Date Last Visited	‎08-15-2019 11:36 PM
Total Messages Posted	1,998
Total Helpful Votes Received	1854

Re: Configuration revision number and VTP server mode