Hi,Could anyone help me.Currently all the incoming calls on the second line which is shared line, whenever we pickup on our phone it will still active on the second line.Previously it will automatically active on the primary line whenever we pick up ...
Hi,Im having problem to connect IP Communicator (either ver 2 or 7 )whenever using Cisco VPN Client 5.0.06.0160 for windowsthe IPC didn't register to the CUCMThere's nothing showing on the screenbut whenever im using Anyconnect VPN Client, it works...
Hi All,I would like to know is it possible to connect SPA9000 with CUCM by using SIP Trunk ? How is the setting on both ?Or is there any other way to connect SPA9000 to CUCM ?I Cannot get any clue on the internet about this Really appreaciate if some...
Hi All,I would like to know is it possible to connect SPA9000 with CUCM by using SIP Trunk ? How is the setting on both ?Or is there any other way to connect SPA9000 to CUCM ?Thanks very muchDavid
Hi,Im using Cisco 1751-V as voice gateway and I configured the onramp fax-to emailWhen I receive from sender that using ATA-186, I only can receive half page then cut off.But when I receive fax from other people, its working well.. can receive the wh...
Hi Jonathan,It's not the Always Use Prime Line feature that I wanted.For example there is an incoming call on 2nd Line, so what I want is when I pickup the phone, the incoming call is automatically activated on my 1st lineThanks
Hi Jason,Thanks for your reply.I have checked that the group-policy for ipsec group and for webvpn has the same split tunnel network list and ip pool subnetwell i can reach the callmanager but however the IP Communicator can't register without any me...
Hi,I still encounter the same problemAttached is thedebug fax fmsp send t30,debug fax fmsp receive t30,andshow call history fax briefReally appreaciate for the helpThanks
