You need to use FET on N5K side and FET on N2K (match the same optic type). The speed is 10GE for th...

Link failure is most likely as it states a cable / SFP issue on the remote side. (SFP failure on the...

The platform that supports VM-FEX is the 5500 you're absolutely right and the documentation is corre...

Those are in the works, expect them posted on cisco.com very soon!

Absolutely, VM-FEX will work with any N5K switches. You can take benefit of fabric path as well on t...

Take a look at the release notes and config guides on cco for 5.0.2 and 5.0.3

The qos configuration has changed so the settings you see in 5.0.3 have disabled fcoe to be enabled ...

The Nexus switching family running NX-OS is fully compatible with IOS. In fact the configuration ope...

That is the banner size limit, no way to increase it at this time.

Best practice would be to use different domain IDs for each vPC pair, however this can work with sam...

Also explained here:http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/troubleshooting...

This is a software roadmap item on N7K and should be coming soon. You have this feature today on Nex...

You need at least a base license, which is free of cost. Just contact your account team or TAC.