We have 2 ASA's that connect to a 2811, but for some reason, the 2nd ASA wont connect anymore. Debuging ipsec or isakmp on the 2811 doesn't come up with any messages. External IP's still correct, and the sites can ping each other.Only debug on ASA f...
I had another thread going, but when I got past my current hang up, I marked the thread as answered, so I wasn't sure if I should start another or continue on... I've tried going through that troubleshooting doc, but I still can't figure this...
Hello,We have an HQ site with a 2811 (w/ADVSECURITYK9-M) acting as the firewall. We currently have 1 ASA5505 that has an established ipsec l2l VPN. I'm trying to connect a 2nd ASA, but I've noticed I can only add 1 cryptomap to the outside interface....
I'm unable to access this ASA from anywhere except console. I'm no ASA expert, but I've compared it to other ASA's I've configured, and I just can't find the error of my ways.This is should be easy, I just need a different set of eyes looking at it n...
I actually had a ping going to devices at both ASA VPN's from another computer inside the router during the show commands...But a funny thing happend last Thursday morning... it just started working. The last changes were what you suggested, but tha...
On the router side, debug still doesn't come up with any messages.The show cry ipsec sa was kind of big, so I inluced that as a text file.On the ASA, the debug defaulted to level 1, but the log messages are the same, except what's posted above includ...
Thank you Jennifer.I was hoping item #1 would fix it, but same result (error message at beging of thread).The UDP in item #2 is for voice, and the other missing networks are not needing routing between this ASA.Like to see any show commands?Thanks a...
With this log message, where is it getting the "remote Proxy Address 10.30.18.0" from?Sep 18 22:06:24 [IKEv1]: IP = 64.X.X.X, IKE Initiator: New Phase 1, Intf inside, IKE Peer 64.X.X.X local Proxy Address 192.168.27.0, remote Proxy Address 10.30.18....