About shallugarg6343

shallugarg6343 · 03-16-2022

Hi Experts, I was creating a local user account with the name "test" on APIC and after i did, i could not login with that. am i missing something here DOC-APIC3-B18# show username adminUserName : adminFirst-Name :Last-Name :Email :Account Status : ac...

shallugarg6343 · 01-25-2022

Hi all,I was trying to upgrade Extreme X440-8t from summitX450-15.5.3.4.xos to summitX-16.2.4.5-patch1-3.xosReason of upgrade is to enable SSH on the extreme and to disable the telnet. So, we have a FTP server and i can ping that FTP from the switch ...

shallugarg6343 · 02-16-2020

Hi guys, We have datacenters where we have ACI fabric, nexus 9k,7k 5kI am new with ACI stuff and want to learn as we have ASA firewalls that connect to it. We donot use much with ACI fabric, normally layer 2 and in another datacenter layer3 routing. ...

shallugarg6343 · 02-16-2020

hi Guys, i have an issue with the 2951 router where the DMVPN stays in NHRP state. IOS :c2951-universalk9-mz.SPA.152-4.M9.bin"Router model CISCO2951/K9 I checked the configuration and everything looks fine, so just want to know if the router is hit w...

shallugarg6343 · 02-11-2020

hi Guys, I have CISCO1921/K9 router and have two interfaces configured i.e. Gi0/0 going towards ISP and Gi0/1 going towards LAN where i have switch configured. I am using DMVPN for WAN traffic that goes to datacenter and using Gig0/0 for internet tra...

shallugarg6343 · 03-17-2022

hi, thanks for your valuable suggestion. I tried from GUI and it worked. I am new to Nexus9k environment and we have two datacenters and have ACI fabric. So, just learning. So, i tried to login to APIC with the new credentials i created and i was thr...

shallugarg6343 · 02-20-2020

Not yet. But these are the logs and if you can try understand and help sh platform packet-trace packet allPacket: 4 CBUG ID: 2231SummaryInput : GigabitEthernet0/0/1.67Output : Tunnel999State : DROP 48 (FirewallInvalidZone)TimestampStart : 230315025...

shallugarg6343 · 02-17-2020

looks like you are correct. the return traffic is being blocked.Will call Global Protect FW and check with them

shallugarg6343 · 02-17-2020

ISP was blocking port U-500. worked with ISP and the issue was fixed.

shallugarg6343 · 02-16-2020

just now i tried. Once i applied the policy on the sub-interface. i tried to ping from switch and started getting drops. CFT-2960#ping 8.8.8.8 rep 1000000000Type escape sequence to abort.Sending 1000000000, 100-byte ICMP Echos to 8.8.8.8, timeout i...

Member Since	‎02-11-2020 04:29 PM
Date Last Visited	‎12-12-2023 11:13 AM
Posts	14
Total Helpful Votes Received	5

User Statistics

User Activity

help in creating local user account in Nexus9k and APIC

Upgrade extreme switch firmware

help understandng ACI Fabric

DMVPN stays in NHRP state. 2951 router

Policy based routing

Re: help in creating local user account in Nexus9k and APIC

Re: Policy based routing

Re: Policy based routing

Re: DMVPN stays in NHRP state. 2951 router

Re: Policy based routing