Hello,I have 2x9500 Cisco chassis on vss which is logically turned to single switch. And I have 2 SDWAN boxes connected to CE routers, my question is, can I have 2 layer3 uplink connection from each 9500 chassis to each SDWAN box ? Which is total of...
hello, At my job we are planning to add 130 WAPS over the existing/production 220 controller based WAPS because customer added people to the site. however I am running out of usable /24 management IP addresses. now my plan is to reserve another /24...
If you bundle, then the uplink SDWAN boxes won’t understand it. They are none Cisco on independent control plane. It would be nice if you can share a diagram of your thoughts.
Thank you Joseph for your comments.if I understood you correctly, the egress interface is only through the active member of the vss chassis. The other two L3 uplink connection from the standby chassis forwards ingress routed traffic through vss L3 in...
2700 and 2800 is WIFI5 compatible only. if you need wifi6 you better go for 9100 series AP. despite, your windows adapter should be cross compatible with 80.11a protocol. please check the widows card manufacturer technical document. good luck ! Hadne...
