About network_champ84

network_champ84 · 08-10-2021

We have a standard config on Cisco router with /29 assigned to customer LAN (all public IPs). Our customer reported an issue where they are unable to reach random websites with request time out. When we checked using router interface as source IPaddr...

network_champ84 · 02-14-2020

Hello, Our Scenarios is two routers connected to ISP 1 and ISP2 both learning default route via BGP. We have further single router attached to each ISP 1 and ISP 2 accordingly and then these two routers are connected via P2P. The idea is to redistrib...

network_champ84 · 08-11-2021

@Giuseppe Larosa all IPs have been changed to safeguard customer network. NAT is handled by customer firewall connected to router on port g0/2Currently they are unable to get onto few websites with not reachable error with examples above. PS C:\User...

network_champ84 · 08-11-2021

Here is the config you requested above. Config is pretty standard that we use however we are unable to replicate this issue from our router i.e only issue is experienced by customer from their available IP ranges linked to LAN port g0/2 on router. ...

network_champ84 · 02-14-2020

network diagram is attached . This setup is very simple and I think I tried to explain in detail but if not please check my network diagram.

Member Since	‎02-14-2020 04:35 AM
Date Last Visited	‎08-11-2021 12:03 AM
Posts	5

User Statistics

User Activity

Cisco 2901 router random websites not reachable

BGP default route into OSPF Area 0

Re: Cisco 2901 router random websites not reachable

Re: Cisco 2901 router random websites not reachable

Re: BGP default route into OSPF Area 0