We will be using the SGE2000-G5 switch which supports Layer3. You suggested the following routers the other day, do these support Option 82? wireless RV120W - good feature set wireless WRVS4400N - has gigabit speed ports as well as simplied webGUI RV220W - most features with gigabit spped ports wired RV042 - dual WAN with port-based vlans RVS4000 - Gigabit speed ports Thanks, Jim
... View more
Hi Robert, I've been having a look at those Routers you suggest but they seem to only support 4 VLAN's. We will require one VLAN for each of the 16 offices. Will the Routers you have suggested manage this or do we need to look at an alternative? Many thanks, Jim
... View more
Many thanks Robert, your info has been most helpful. We will get our hands on one of the routers you mention and have a play. No doubt we will be back on this topic if we hit a brick wall. Thanks for your prompt attention. Jim
... View more
Many thanks Robert. I'm assuming these are not ADSL Routers? It would be handy to have one box instead of a router and modem. Are there any ADSL Routers that will also do the job? Do all of these have the inter-vlan routing option to save us having to make those rules? We like things as simple as possible! Many thanks, Jim
... View more
Many thanks Robert, We don't have a router yet so probably won't be able to test this configuration until we obtain one. Do you have any suggestions as to a model (ideally with GUI as we are no Cisco command line experts) that will enable us to link this all together? Looks like the set up will be quite straight forward. Many thanks and I look forward to your reply. Jim
... View more
We have been set the task of securing a small managed office system which is currently set up with a standard switch allowing each of the offices (containing different companies) to see each other, and in some cases, access each others documents across the network. Obviously this is a far from adequate set up and our aim is to isolate each office using VLAN's but share a common internet connection provided by the managed offices. We have two Cisco SGE2000-G5 layer 3 switches but we are new to Cisco equipment and VLAN's so we are not quite sure on how to implement this. DHCP would need to be provided by a Router, there is no Server. We are open to suggestions on the Router as we have yet to purchase one. I hope someone can be of assistance. Many thanks, Jim
... View more