About wenchen784491556

wenchen784491556 · 04-04-2020

Yes, I know the CLI command formatIP nat inside source static <protocol> <inside IP address> <inside port #> <Inside Global IP or Interface> <External Portx>And I can forwarding any port other than 80 and 443 on my router.I mean I can forwarding por...

wenchen784491556 · 04-05-2020

Thank you very much.To finger out what's wrong of my router, I run GNS3 simulator again, and I chose the same version of ios and eveninstall the last version of "Cisco CP express" on GNS3.everything is ok on that virtual router.Finally, I found out t...

wenchen784491556 · 04-05-2020

First of all, thanks for you help, Muhammad Awais Khan.Finally, I found out why I can not forward the port. Guest what?Because of my ISP block the port!-------------------------------Why I spend $5/month to get a static IP address? because I want to ...

wenchen784491556 · 04-05-2020

Thank you. I know u wants to make sure that my service is actually running at Local IP address 10.1.1.111 and listening at port 443.Yes, I can see connection "Open" because there is a Raspberry PI set up as a VPN server.I can remote SSH to that serve...

wenchen784491556 · 04-04-2020

sure! here's my config:version 15.6service timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname hello!boot-start-markerboot system flash0:/c1900-universalk9-mz.SPA.156-3.M1.binboot-end-marker!!ip dhcp...

Member Since	‎02-18-2020 11:53 PM
Date Last Visited	‎04-08-2020 12:57 AM
Posts	5

User Statistics

User Activity

Cannot forwarding port 80,443 on cisco 1941

Re: Cannot forwarding port 80,443 on cisco 1941

Re: Cannot forwarding port 80,443 on cisco 1941

Re: Cannot forwarding port 80,443 on cisco 1941

Re: Cannot forwarding port 80,443 on cisco 1941