About MAHESH.K

MAHESH.K · 05-27-2017

1.How to know whether the switch is in Layer 2 or layer 3 mode. 2.How to convert layer 3 to layer 2 and vice versa in cisco sg 350 switch.

MAHESH.K · 12-27-2016

INDBLRPK2B11ISSFARM01L2#sh int Gi4/20GigabitEthernet4/20 is up, line protocol is up (connected) Hardware is C6k 1000Mb 802.3, address is f4cf.e27f.367b (bia f4cf.e27f.367b) Description: MGMT MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 2...

MAHESH.K · 12-26-2016

Hi, I have been provided 30Mb/s connection by ISP and i want to split the bandwidth 15Mb/s between two different network using QOS. If one of the network is utilizing less bandwidth than allocated Bandwidth ,then other network should utilize maximum...

MAHESH.K · 12-15-2016

Hi, We have been given /29 subnet by the isp. Can it be divided into still smaller subnets? Mahesh

MAHESH.K · 11-28-2016

Hi, should i assign public ip provided by isp to router interfaces and firewall or only to firewall interfaces. Thanks

MAHESH.K · 12-16-2016

Hi, This is the only subnet given by isp. one more thing, can i use this public ip block given by ISP to both WAN interface and two different internal networks?

MAHESH.K · 12-03-2016

can i assign private ip to firewall interfaces? or should i assign only public ip addresses to router and firewall interfaces?

MAHESH.K · 11-28-2016

Hi, 1. Yes , it was given by isp for internal network use .Separate subnet isp and router , i have no idea as they havent provided anything such. Cant i use the same subnet for all the interfaces of router? 2. I need a Static NAT. Mahesh

MAHESH.K · 11-28-2016

Both the firewalls should be used for two different inside networks. and also for router interface should i assign public ip address??

MAHESH.K · 11-28-2016

Firstly i want to know where all i have to assign the public ip given by isp(Which interfaces of router and firewall). Secondly how to load balance between two firewall.

Member Since	‎11-27-2016 08:37 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	11

User Statistics

User Activity

Information required about Cisco sg350

13 Input errors in port interface log. Is it is a problem?

QOS

Dividing the subnet

Assign public ip to router interfaces

Hi,

can i assign private ip to

Hi,

Both the firewalls should be

Firstly i want to know where