About itsupport542

itsupport542 · 11-28-2016

I have plan to connect separate router on Cisco 5505. My main network is 192.168.0.0 and the network on separate router is 192.168.11.0. I need some help to create routing accessing that 192.168.11.0 network from the main network. Separate router is ...

itsupport542 · 01-26-2017

So how i am going to get this working? Do i have to create a new interface for that external router to set up different security level?

itsupport542 · 01-10-2017

Does the D-link have two interfaces? One interface is the WAN interface with IP 192.168.0.24 and the other interface is for the wireless network? Is the IP of D-link for wireless 192.168.11.254? Actually ip 192.168.11.254 is for lan and wlan inter...

itsupport542 · 01-05-2017

Here is the information, hope this is enough. Main networknetwork: 192.168.0.0/24gw: 192.168.0.1 (this is ASA 5505) Separate network (D-link router)wan ip: 192.168.0.24network: 192.168.11.0/24gw: 192.168.11.254 There is one interfaces:interface Vl...

itsupport542 · 11-29-2016

There is no special configuration at this time, the device is working more or less like a switch.

itsupport542 · 11-28-2016

Thank you. So, do i have to specify routing rules because there is a separate gateway on the main network (192.168.0.1) or is the 192.168.11.0 network accessible without it?

Member Since	‎11-28-2016 01:35 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6
Total Helpful Votes Received	3

User Statistics

User Activity

Cisco 5505, static route to other subnet on same network

So how i am going to get this

Does the D-link have two

Here is the information, hope

There is no special

Thank you.