Hi I'd like to know if it would be possible to simulate broadcast streams in Cisco cml? so I I had 2 offices 3 switches at each office and a router on each end connecting the wan. I doubt it tbh, but thought I'd just ask. Cheers
Hi I'm attempting an ether channel config, and I' sure I've implemented it correctly, but when I check "sh port-channel 10" I get no operational members": sw1# sh int port-channel 10
port-channel10 is down (No operational members)
admin state is up,
...
Hi there, can someone explain why i cant copy the config onto the 9K? Thanks Below is from the current 5Kinterface Ethernet2/1
switchport mode trunk
speed 10000
channel-group 201And when i copy it into the 9KSwitch1(config)# interface Ethernet2...
@Sergiu.Daniluk you said you wouldn't recommend using "no autostate", but does this mean i didn't copy the config properly or i'm just missing something, I understand that for an SVI - Its VLAN must exist and be active in the VLAN database, at least ...
For some reason i cant copy this onto the 9K interface Ethernet102/1/30
description [srv,rd=no-mon]
shutdown
switchport access vlan 404
spanning-tree port type edge
spanning-tree guard root
link debounce time 10
no snmp trap link-status...
Ok so the new switches are already powered on and patched and racked and I've nearly finished copying over the configs, so on the day of implementation what would be the process to make the new switch live? @marce1000
