About redgasgiant

redgasgiant · 09-06-2023

I'm having trouble wrapping my head around setting qos for my NEC phones after looking at the config guide. Maybe I'm over thinking it.I admit I'm an IOS noob- My old switches made this simple via the gui. Just hit the drop downs for COS 6 and DSCP 4...

redgasgiant · 08-29-2023

I want to monitor when ports go into error disable due to BPDU guard. On my test bench I can put my cbs350 into the situation and see that a port is disabled but I can't seem to SNMPWALK the OID. Does the small business series even support this? info...

redgasgiant · 07-12-2023

Is it normal behavior for the speed and duplex settings to go away when an SFP is inserted into a TwentyFiveGig port? I'm not using an official Cisco brand SFP so I thought maybe these FS.COM 10gig sfp units aren't working as intended. Catalyst 9500 ...

redgasgiant · 06-29-2023

I've been experimenting with connecting the "core" 2 stackwised 9500(which supports Pagp and LACP) to the "edge" SG350(which supports just LACP?). The LAG on the 9500 consists of 2 25gb ports 1/0/1 and 2/0/1 and the LAG on the SG350 is 2 10gb ports...

redgasgiant · 03-28-2023

https://bst.cisco.com/bugsearch/bug/CSCvq89982)I'm being affected by this issue. CPU is pegged. Support is saying to make a new /30 subnet or vlan to pass the traffic to the firewall. We want to make the least amount of changes possible. We have 1 ro...

redgasgiant · 08-29-2023

Thanks BB, I have downloaded the MIB files... But I have to be honest.. I do not know what to do with them. I have copied them into my /usr/share/snmp/mibs on the machine I used to snmpwalk. But again, I have no idea what I'm doing!

redgasgiant · 07-12-2023

This answers my question! I guess you don't get some basic features with $12,000 switches! Table 1. Default Layer 2 Ethernet Interface ConfigurationFeatureDefault SettingOperating modeLayer 2 or switching mode (switchport command) for C9500-12Q-E, C...

redgasgiant · 07-12-2023

They do show up in inventory. And I'm running Bengaluru 17.6.x I just got these things unboxed last week. So how then are these https://www.fs.com/products/36351.html 10g SFPs negotiating to 1g ? For example I have a 1g capable industrial switch and...

redgasgiant · 06-12-2023

Solved for me: Since these are switches we are testing before putting into production I have time and freedom to F around. I went ahead and I did a:"factory-reset boot-vars" -which nukes all the variables in ROMMON copied an image to a usb, then fr...

redgasgiant · 06-12-2023

Here is the output of those commands. Switch does in fact boot, so I included both outputs. I stacked the switches so that is why there are stack commands present. I have italicized the commands I want to delete. I bolded the command I need to edit. ...

Member Since	‎03-04-2020 02:44 PM
Date Last Visited	‎09-25-2023 03:50 PM
Posts	28
Total Helpful Votes Received	1

User Statistics

User Activity

Simply setting QoS COS 6 DSCP 40 on vlan 300?

CBS 350 SNMP - do these switches support all OIDS? errDisable?

Port speed settings go away when SFP is inserted - Catalyst 9500

Best way to LAG Catalyst 9500 to a SG350xg

SG550:CPU 100% when source and destination subnets are the same

Re: CBS 350 SNMP - do these switches support all OIDS? errDisable?

Re: Port speed settings go away when SFP is inserted - Catalyst 9500

Re: Port speed settings go away when SFP is inserted - Catalyst 9500

Re: How do i remove this variable in ROMMON mode on WS-C3750V2-48PS-S

Re: How do i remove this variable in ROMMON mode on WS-C3750V2-48PS-S