Dear Good People,We have a scenario like below :Our main goal is to configure NAT on FTD-1000 via FDM to translate multiple address to a single public ip address. Please guide us to configure on FDM. And can we apply PAT overload on FTD same as route...
Hi,We are getting below error while trying to access/login ESA from outside using hostname via https. Reachability is ok as dns resolution is happening. I am guessing there might be certificate issue (Device certificate is being used). Experts can sa...
Hi Good People,Currently we are running standalone cisco ESA(300 v) with AsyncOS version 13.0.5-007. We want to upgrade to 15.0.0-104 version. As per my knowledge we can go directly from 13.0.5-007 to 15.0.0-104. But my question is whether we need t...
Dear All,Can you please tell if we mirror trunk port (with native vlan) as source how we have to configure in cisco switch? How destination server will detect native vlan packets. switch config (Trunk port : 1/0/24):------------interface GigabitEther...
Dear concern,We have deployed a ESA VM (300v) and installed license (features keys) and it's working fine. If we want to build another VM and use same feature keys will it work?
Ok thanks. Got it. In case of Native vlan for the source port, the below mirror config will work or need any other command?interface GigabitEthernet1/0/24switchport trunk native vlan 10switchport mode trunkendmonitor session 1 source interface gi1/0/...
Hi,Thanks for the reply. We have done this same way. Actually my question was that can we mirror a trunk port as source? we have already taken a free port for destination which is connected to a span server. So how the destination span server will se...
Thanks Ken. Another question :Existing ESA VM's OS is 13 and New VM's OS is 15.x.x. If we want to take backup from existing one and load same configuration backup to new VM(OS-15.x.x). Is there any dependency? As manual configuration of policy will b...
