About Joseph Young

Joseph Young · 10-30-2023

Anyone know if there's a way to get adaptive cards to display as full-width in webex? MS teams seems to support this through adding "msteams": { "width": "full" } to the json, but this doesn't do anything for webex.Basically I'm just trying to get th...

Joseph Young · 10-02-2023

Whether the ping is coming from outside of the fabric or an internal endpoint is mostly irrelevant. You just care about whether it is hitting the switch vxlan encapsulated or not.If vxlan encapsulated use in-select 14 or 7 and match on inner headers ...

Joseph Young · 07-06-2017

Hello, What process did you take to wipe the switch? setup-clean-config.sh was the old way to wiping and in newer version (2.x and later I believe) you should use "acidiag touch clean" on the leaf (the same as you would on an apic). Can you confirm i...

Joseph Young · 06-12-2017

I wouldn't recommend using an L3out address as a gw. You open yourself up to a lot of unsupported configs. I would recommend moving the gateway into ACI. And you are right, you can't have external EPG subnet and BD subnet overlap.

Joseph Young · 06-08-2017

Hi Andrew, A new l3out connection would either have to be deployed in an existing l3out as a new path in the logical interface profile or it would have to be deployed as a new logical interface profile in a new l3out. I would just think about it fr...

Joseph Young · 06-07-2017

Thanks for that output. I don't see any problems just from that. What kind of OS is the endpoint? Can you get a capture going on the host nic to see if traffic is actually making it to that point?

Member Since	‎12-05-2016 05:21 AM
Date Last Visited	‎11-06-2023 07:46 AM
Posts	26
Total Helpful Votes Received	21

User Statistics

User Activity

Support for full width adaptive cards

Re: ELAM not triggered by paket from outside the fabric

Hello,

I wouldn't recommend using an

Hi Andrew,

Thanks for that output. I don