About Maheshn0205

Maheshn0205 · 06-02-2020

Hello Cisco Team,Currently, I have this UCS 5108 AC M5 Blade Server, I'm trying to connect to the system via connector as shown in the picture, the system is up and running but I'm not able to see the screen. This is the first time I'm working on thi...

Maheshn0205 · 04-22-2020

Hello Everyone, I hope everyone is safe out there. Can anyone tell me how to fix this error? EDAC MC1: 1 CE memory scrubbing error on CPU_SrcID#0_Ha#0_Chan#1_DIMM#0 (channel:1 slot:0 page:0x14864db offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_cod...

Maheshn0205 · 03-17-2020

Hi All, I have a UCS C220 M4 SFF server stuck at Configuring platform hardware. System specifications: IMC Firmware V: 4.1(1c)BIOS: C220M4.4.1.1c.0.1113190848I'm facing this issue after updating the system using Host utility. I tried this link: https...

Maheshn0205 · 06-03-2020

Yes it in Standby mode which is a default setting done by Cisco. As per my understanding, to turn the machine on, I need access to UCS manager which I don't have one.

Maheshn0205 · 03-18-2020

Hello Kirk,Thank you for the suggestion. Removing the batter didn't work, but I still have the access to IMC so I tried to downgrade the bios first. After downgrading the bios, the system is able to pass through the POST then I performed system reboo...

Member Since	‎03-17-2020 03:44 PM
Date Last Visited	‎06-10-2020 10:00 AM
Posts	5

User Statistics

User Activity

Cisco UCS 5108 B200 M5 Blade Server

Memory scrubbing error

C220 M4 Stuck at Configuring platform hardware step

Re: Cisco UCS 5108 B200 M5 Blade Server

Re: C220 M4 Stuck at Configuring platform hardware step