About weylin.piegorsch

weylin.piegorsch · 03-17-2024

I remember reading some time ago about "Failover Ethernet" on Catalyst switchports. This was kinda like a port-channel in "mode on" except that it was not a port-channel, but still bound two interfaces together so that only one ever was active, with...

weylin.piegorsch · 01-07-2024

I know I can disable a port under Fabric > Inventory. Is there a way I can do it under Fabric > Access Policies, through a Interface Policy Group?I'm using SFP-10G-T-X. Per the release notes, I can't have anything at all (with some exceptions that ...

weylin.piegorsch · 12-31-2023

Why does ACI track loose nodes?Fabric > Inventory > Fabric Membership > Unmanged Fabric NodesWhat is ACI doing with these, that it needs to treate these devices with a level of magnificence greater than any other connected, non-fabric device?weylin

weylin.piegorsch · 10-26-2023

I just repatched my APIC from port 1 on a leaf to port 48 on the same leaf. I now have a persistent fault on port 1 that I don't know how to clear. I'd prefer to neither acknowledge nor ignore the fault - I'd like to clear it from the fault database...

weylin.piegorsch · 09-13-2023

Hello,I have this topology: spine101 port 17 <-> leaf131 port 36 (yes, it's dual-spine with more leafs that this, I just want to focus here on this link unless I need to consider the larger topology)The link is functioning fine if I do nothing. I'm ...

weylin.piegorsch · 03-18-2024

thanks @Ramblin Tech and @Joseph W. Doherty, this is exactly what I was looking for. I like the concept of Flex Links in principle, it does solve some problems. But our organization has a long history of architecting-away the cases where Flex Links ...

weylin.piegorsch · 01-09-2024

Thanks @Robert Burns, that's a perfect answer!

weylin.piegorsch · 01-08-2024

Thanks @Robert Burns. Is there anything that should be in the policy group? Minimally no AAEP, is there anything else I can do to enforce the port to be unusable?In some cases - in my particular case, adjacent ports to an SFP-10G-T-X - even having ...

weylin.piegorsch · 01-04-2024

thanks @Ruben Cocheno . Is it only for support to VMM Integration? I'm not using that, but I can concede the point there. What rules are used to decide whether a device gets listed as an unmanaged node? It's clearly not simply that it's detected ...

weylin.piegorsch · 12-07-2023

I'll acknowledge there's mostly no reason to login to an ACI leaf/spine console port. Nearly always, the inband (SSH from APIC to TEP address) and out-of-band (SSH to mgmt0) are fine for standard and contingency access.However, console is key in sit...

Member Since	‎02-05-2015 06:46 AM
Date Last Visited	‎03-20-2024 12:30 AM
Posts	98
Total Helpful Votes Received	110

User Statistics

User Activity

Failover Ethernet

Policy Group to Shutdown a Port

Why Does ACI Track Loose Nodes

Clear ACI Interface Fault After Moving APIC

Enable CDP on Leaf Uplinks

Re: Failover Ethernet

Re: Policy Group to Shutdown a Port

Re: Policy Group to Shutdown a Port

Re: Why Does ACI Track Loose Nodes

Re: Login to Leaf via console port