About huypd

huypd · 02-22-2021

Hi Team Cisco and everybody.I want to order License part: LIC-UCM-11X-ENHP-ABut this part already End of Sale and I can't find the replacement part.Please tell me if you know replacement part,If it's not have yet replacement part, when it have the re...

huypd · 01-27-2021

Hi Guys,Please help me this case.I have old AIR-CT2504-K9 in use and new C9800 Controller.I want to migrate all config from CT2504 to C9800, include Mac Address Allow on Access List Is there any software or a way to help me?Thank you guys.

huypd · 01-06-2021

Hi guy,I am searching for ISR4000 Series ( ISR4321/K9 ) does it support GLBP ( Gateway Load Balancing Protocol ) feature? And does it need license to use?I searched many websites and found no information.Please help me to findout.Thank alot!

huypd · 07-23-2020

Hi everyone,I have a question, does the AIR-AP1832I-S-K9 support mode standalone?I saw " Standalone " in deployments Mode, but in the software I can't find to download autonomous mode ( Only Lightweight and Mobility Express ).Please explain for me. T...

huypd · 07-23-2020

Hi Guys, I need your help.I have a Controller AIR-CT5520-K9 Does not work with module GLC-LH-SMD=. Two side with same GLC-LH-SMD=.Only one port SFP used.Please troubleshoot this problem

huypd · 07-24-2020

In this link say yes, 5520 support SFP-H10-CU3M https://www.cisco.com/c/en/us/td/docs/wireless/controller/5500/5520/install-guide/b-wlc-ig-5520/m-overview.html

huypd · 07-24-2020

Hi all,I use SFP-H10G-CU3M, Led 10Gb is up but the problem still come up.Port Status is Link down.Maybe it need TAC Case :D Thank you guys!

huypd · 07-23-2020

Hi guys, Color two ports SFP in Web UI is red.What is that mean?

huypd · 07-23-2020

Hi Mr Leo Laohoo, They plug GLC-TE in port 1, GLC-LH-SMD in port 2 and restart the controller. After boot up, the led 10Gb bright, but status in two ports is " link down " Port 2: GLC-LH-SMD have line in from switchPort 1: GLC-TE No line in, just plu...

huypd · 07-23-2020

Hi Mr RRudling,Yes, We knew GLC-LH-SMD is 1G SFP. But I dont know why when my customer installed GLC-LH-SMD=, the controller still power up led 10G. but no led in the port 1 and port 2. In WebUI, status of two ports is " link down "

Member Since	‎03-28-2020 03:51 AM
Date Last Visited	‎02-24-2021 08:44 PM
Posts	23

User Statistics

User Activity

Replacement part for LIC-UCM-11X-ENHP-A

AIR-CT2504 migrate to C9800 Controller

ISR4000 Series support GLBP feature

AIR-AP1832I-S-K9 Mode Standalone

AIR-CT5520-K9 does not work with GLC-LH-SMD=

Re: AIR-CT5520-K9 does not work with GLC-LH-SMD=

Re: AIR-CT5520-K9 does not work with GLC-LH-SMD=

Re: AIR-CT5520-K9 does not work with GLC-LH-SMD=

Re: AIR-CT5520-K9 does not work with GLC-LH-SMD=

Re: AIR-CT5520-K9 does not work with GLC-LH-SMD=