how can the bridge-domain be disabled if the Ethernet member interface goes down ?
for examplein this config :
bridge group 5 bridge-domain 5 interface TenGigE0/0/0/2 ! neighbor 10.1.7.6 pw-id 5 neighbor 10.1.1.3 pw-id 5 ! neighbor 10.1.1.4 pw-id 5
...
I want to use TCL script in ASR9k to send emails in log event .I am trying to add munltiple CC adresses ,but I receive error when script is executed :RP/0/RSP0/CPU0:Sep 16 12:18:42.533 : syslog_dev[92]: noscan: Requested action not taken: mailbox n...
Hi I have to enble virtual-profile aaa in 7200vxr router but i have only two options: Router(config)#virtual-profile ? if-needed virtual-template I don't understand where is the problem? Any help please the version is: isco IOS Software, 7200 Softwar...
Hi I have to enble virtual-profile aaa in 7200vxr router but i have only two options: Router(config)#virtual-profile ? if-needed virtual-template I don't understand where is the problem? Any help pleasethe version is:isco IOS Software, 7200 Software ...
Hi Harold This is good suggestion. I had also tested that , the prefix is advertised ,but no more connectivity with the host .the problem is that the IP became the nect-hop and disconnect. The best static route option is if added just only via inte...
Hello It is not the loopback interface to be advertised .I want to advertise something from this firewall .One /32 ip that is in one connected subnet . router bgp 64000bgp log-neighbor-changesbgp router-id 10.10.10.1
address-family ipv4 unicast
netw...
I have the same issue .I want to advertise one /32 prefix that via network statement ,but not advertised .This is normal as the previous said .The network statement in bgp proces, does not work ! the prefix does not enter in bgp table Regards ilir...
