Hi Nick, The command is available in normal image. Let me know on which WLC image are you trying to give this command. There is a limitation to enable this though. Encryption of the redundant link is not supported if redundancy port is used as redund...
Hi Asser, As per my understanding, you want to convert the 50 ap count license WLC to secondary to work for N+1 scenario as per the figure.This design is possible only when you have the WLC converted to HA-SKU mode by doing the change in GUI of the W...
Hi mahjouboi11,With different SSID, seamless roam will not occur and thus you will have to keep the SSID name as same for both the places. You can change the interface mapped to the SSID for each place with the help of AP group but the SSID name shou...
Hi Mike,Any one of the condition causes the passive client not to work. Yes, if passive clients are in placed in the user-defined AP group, then they will not work.Regards,Debashree
