Hi Josef,On P2P meetings, you're correct.Regarding multipoint calls, I'm not entirely sure but think all scheduled rooms have to connect to the meeting before it will be marked as completed. Also keep in mind that for this to work, DNS resolution nee...
Since it broke all of a sudden, what has changed?- any firewall that might be blocking (part of the ) traffic between CTS-Manager and CTS?- re-addressing of the endpoints? If you check for the ip addresses you find for the room in CTS-Manager under S...
Hi Leire Ulacia Hernando,You should be able to get the directory setup on the CTS with a touch panel connected. Following the link I assume you have already checked on your CUCM that it has the UDS service started and the parameters updated. Please c...
Alex,You may find it in the log files, but the fastest way to find out would be to setup a call and do a small packet capture from the CTMS cli as follows:- utils network capture 1000 file size ALLwill capture 1000 packets in the filename you specif...
Hi Marta,Where do you see the AF12 listed? If that is in the CTS logs, those values relate to the audio/video streams that the room is receiving from the multipoint switch, and the QoS marking configuration on the MCU is a global setting (configure -...