Ahmed Shahzad

Ahmed Shahzad · 03-15-2015

Is that possible to run MPLS over GETVPN? We have a customer having MPLS connectivity from a service...

Ahmed Shahzad · 05-27-2014

G'day Guys,Scenario is that VSS is established between two 6500 with single SUP in each chassis but ...

Ahmed Shahzad · 07-29-2013

Thanks Tarik.

Ahmed Shahzad · 07-28-2013

G'day Gurus,I have created a profile for Network Access Mnaager using Standalone version of Profile ...

Ahmed Shahzad · 06-11-2012

G'day Guys,I am trying to install the certificate on Cisco Wirless Control System and using the step...

Ahmed Shahzad · 05-17-2011

Hi Gents,I have following questions Dual SUP vs Quad SUP:1. With dual SUP VSS (one SUP in each catal...

Ahmed Shahzad · 03-31-2011

Thanks Jon,I am checking counts on "show route-map PBR_WSA" and could not found any hit.There are nu...

Ahmed Shahzad · 03-31-2011

Thanks Jon.I have tried both options set ip default next-hop and set ip next-hop but it does not wor...

Ahmed Shahzad · 03-31-2011

Hi,I am trying to configure PBR on SVI of Cisco VSS but it is not working:IOS version is:Cisco IOS S...

Ahmed Shahzad · 02-13-2011

Hi Gurus,Do we need to enable HTTPS and SSH both on device, to enable access from CCP? Or only SSH w...

Ahmed Shahzad · 01-17-2011

Hi,Thanks Lei for your response.It means we can run GETVPN among PE and P routers without any proble...

Ahmed Shahzad · 01-13-2011

Hi Gurus,We would like to implement MPLS with Ingress PE NAT, so customer with overlapping IP addres...

Ahmed Shahzad · 12-19-2010

Thanks guys for your support.Best Regards,Ahmed Shahzad.

Ahmed Shahzad · 12-17-2010

Thanks Guys for your responses.The issue is with the return traffic of customer having overlapping I...

Ahmed Shahzad · 12-16-2010

Thanks Reza,My questions is that how do we can allow access to shared services from multiple MPLS VP...

Date Registered	‎02-17-2008 11:51 AM
Date Last Visited	‎02-24-2021 01:37 AM
Total Messages Posted	140
Total Helpful Votes Received	5

MPLS Over GETVPN Over mGRE