Just wanted to give an update on this. I finally managed to solve the problem. I'm not sure if the error messages listed above are related to the change I made, but at least the LAP1242 are now registering to the WLC2500.The setting I changed was un...
Hi,As mentioned before, I'm not an expert with all this. However, from what I read there is no difference in product number with mesh 1242 or normal 1242. 1242 just supports mesh. So wondering how you identify that yours is mesh OS. How can I check i...
Scott,I'll take a look at your link.... not an expert in this area, so might be challenging .In the meantime... this is what's showing exactly in the log of the WLC. I've highlighted the errors that were also in this original post. However... maybe ...
Hello Scott,Thanks for your prompt reply!Are your 1242 and 1131 connected to WLC2500 (WLC2504) as well? If so, what firmware does your WLC have and which one on your 1242?I hooked into this threat because AP, WLC and errors are exactly the same. Just...
Hello,I just run into this threat searching for an answer to the problem I have had for quite some time. The problem you are describing is exactly the same as my problem. We also have LAP1242, WLC2500 and the same error messages.The last post is from...