About DavidGray77695

DavidGray77695 · 02-13-2023

Hello,We have a customer who wants to have 2 connection profiles. One is a full tunnel, where users authenticate via RADIUS. This is already in place and works fine. The next connection profile is for a select group of users in a specific LDAP AD Sec...

DavidGray77695 · 04-26-2021

Hello, We have a ASR903 running 16.09.04. We have 2x A900-RSP3C-400-S route processors installed, and hit an issue when we were migrating over to the 903 from our old core Juniper router. During the migration CPU was sitting about 95% constantly, on ...

DavidGray77695 · 08-24-2020

Hello All, We have had an issue recently with a new 903 where the CPU was constantly at around 90-100%. It should be noted, he CPU went this high after we started migrating connections to it from our old core router, which ultimately caused us to rol...

DavidGray77695 · 06-23-2020

Hello, We have 2 UCS servers with 32Gb of RAM in each of them, the current RAM is samsung RAM (32GB Samsung M393A4K40CB1-CRC Server RAM, Low Profile, PC4-19200 (2400), ECC Registered (RDIMM), 288 Pin, CL17, 1.2V) We need to upgrade our RAM now, and i...

DavidGray77695 · 06-10-2020

Hello, Just looking for some clarity around a deployment we are looking to do for a customer. So Basically they are looking to put in FTD 1140's at multiple sites. We will be looking to configure sub-interfaces on this and then the usual ACL's etc fo...

DavidGray77695 · 04-26-2021

Hi, We plan on doing an upgrade before our next attempt, we also plan on taking a much more structured approach this time to try and catch if there is a specific connection that we move that causes a spike. Thank you for the response.

DavidGray77695 · 05-14-2020

I just tried that, no luck. Still the same issue unfortunately.

DavidGray77695 · 04-09-2020

Hi Gustavo, Thanks for that, that solved my issue :) I have one other question, with Dynamic split tunnelling, can we exclude certain public subnets? Or is it only DNS names? Our customer is trying to break out MS Teams traffic locally, and it seems ...

DavidGray77695 · 04-07-2020

Hi, So we would need to upgrade to latest ASDM? Which is 7.13 if I remember correctly? From CLI I also dont seem to have the option dynamic split options:The only options I have are on the attached image.

DavidGray77695 · 04-07-2020

Hello All,Hoping someone might have some information to assist me. I have a ASA 5585-SSP-10 pair running in context mode. It is version 9.8(2).We have a customer who wants to configure dynamic split tunnels. However we cannot complete the configurati...

Member Since	‎04-07-2020 06:49 AM
Date Last Visited	‎02-15-2023 11:18 PM
Posts	12

User Statistics

User Activity

Anyconnect Connection Profile - Automatic based on specific AD group

ASR903 - uea_mgr causing 100% CPU

ASR 903 High CPU

Mixing RAM manufacturers in Cisco UCS 220 M4S

FTD 1140 - FDM/FMC ?

Re: ASR903 - uea_mgr causing 100% CPU

RESTRICTED - Re: CLI Analyzer v3.6.5 - Upload failed

Re: Community Ask Me Anything- Configuration, Troubleshooting and Best Practices: Anyconnect Remote Access VPN on ASA and FTD.

Re: Community Ask Me Anything- Configuration, Troubleshooting and Best Practices: Anyconnect Remote Access VPN on ASA and FTD.

Re: Community Ask Me Anything- Configuration, Troubleshooting and Best Practices: Anyconnect Remote Access VPN on ASA and FTD.