Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
AlexChan21895
Spotlight
Spotlight
Member since ‎04-07-2020
‎05-27-2020
Awards
1
Spotlight Awards Rookie
Recent Badges
Awards

User Statistics

  • 21 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 5 Helpful votes Received
Recent Badges
See all
Spotlight Award
20 Replies
10 Replies
5 Replies
1 Helpful Vote

User Activity

1832i Can't boot. Is it a hardware problem?

05-26-2020
Console output:------------------------------------------------------------ U-Boot 2012.07 (btldr release 30) (Mar 03 2017 - 19:13:24)This product contains some software licensed under the"GNU General Public License, version 2" provided withABSOLUTEL...

1832i丢失固件,启动停留在UBOOT请问如何把固件写入?

05-25-2020
本帖最后由 AlexChan21895 于 2020-6-7 23:10 编辑 谢谢大家。

My OEAP1810 is jioned then disconnected form the WLC.

04-08-2020
I'm using vWLC 8.5.161, The AP is AIR-OEAP1810-CRD. Another AP is working excellent. I try to add this AP. It's show joined. But it will be disconnect soon. The light flash red-green-orange. It's mean try to jion the WLC. And it jioned,then disconnec...

AP反复加入控制器,然后反复断开.求助。

04-07-2020
本帖最后由 AlexChan21895 于 2020-4-8 14:33 编辑 console口输出显示在下方，vWLC虚拟控制器版本为： 8.5.161，AP为AIR-OEAP1810-CRD，在控制器内识别为AIR-OEAP1810-B-K9，恢复出厂后，它会自动升级适合控制器的固件版本，自动加入等等一切正常，但是加入后很快它又会闪红黄绿三色灯，表示又在重新连接控制器，而这时候它在控制器的状态是加入中，而等上一会，它就会成功地加入到控制器，并且在控制器的已加入AP列表中出现，那时候会闪绿灯...
Community Statistics
Member Since ‎04-07-2020 09:51 AM
Date Last Visited ‎05-27-2020 12:02 AM
Posts 21
Total Helpful Votes Received 5
Helpful Votes From
See all >
Awards
Community Spotlight Award
Rookie