rick.payne
Level 1
Level 1
Member since ‎08-16-2001
‎04-13-2018

User Statistics

  • 15 Posts
  • 0 Solutions
  • 3 Helpful votes Given
  • 0 Helpful votes Received

User Activity

Is it possible to use Hostnames instead of IP addressing for ISAKMP when a Spoke VPN comes into the Hub using routers?The issue is the remotes could come from anywhere, so the Hub will never know the IP address to set up different Pre-Shared-Keys in ...
I have a customer who has the same subnet in 2 different locations. They need broadcast and multicast to go to each other. Neither site has duplicate address to the other. previously connected by switches. Noe need to connect them by routers over a r...
Is there a way to set the Codec when a call is placed using CCME and the phone is located across a wan? Since the Phones are registering to the Hub I am guessing the hub thinks it's a local phone and sets all calls to G.711. Would like the ability to...
I have a setup where I have a default route to the internet for a VPN router. It connects to a base station VPN END Point through the Internet. I use ROUTE-MAPS to send packets from the LAN interface to the VPN with no problem. The situation I have n...
Setup: 1 hub and 1 Spoke Staticly nat, and 1 other spoke on the open internet (Public address). Is there a way to setup NHRP to inspect the ISAKMP profile of it's spoke and send to the other spoke for dynamic Buildup of a spoke (nat) to spoke tunnel ...
Community Statistics
Member Since ‎08-16-2001 11:16 AM
Date Last Visited ‎04-13-2018 08:03 AM
Posts 15
Helpful Votes Given To