I have to migrate a VRF-aware SSL VPN configuration from an C3900e-UNIVERSALK9-M running IOS 15.7.. to a Cisco CSR1000 running IOS-XE v. 16.12.4 with the AX license active.In the C3900 I have many clients on different VRFs and different webvpn contex...
I'm trying to make the SSL VPN gateway use TLS 1.2 for the SSL Anyconnect portal on a Cisco CSR1000, does anybody have a clue where I can enable it? I can't find it under any of crypto ssl sub-categories. I am using version csr1000v-universalk9.16.09...
Hi, I have set up a Cisco CSR1000v router in the Azure cloud in West Europe with DMVPN. Everything is working but I'v tried to install a few demo licenses with more throughput but it seems it only allows 100kbps bandwith. First I tried th ax_2500M, t...
Hi, I have a dhcp pool on a public network and recently there are very strange MAC addresses geting dhcp from the router.Here is an example:10.20.2.155 0034.6564.3766.6666. Nov 21 2011 02:43 PM Automatic 3337.64and al...
Hi @teetk I found out that the SSL VPN could not be VRF aware on Cisco CSR1000 running IOS-XE v. 16.12.4 (could have changed the last 3 years) and we had to move to another ASA based solution where interface zones and NAT are used to delegate between...
I am having the same issue with DMVPN and IKEv2 IPSec tunnel protection. The strange thing is I have 2 DMVPN hubs and this is only happening on the secondary hub. %CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd IPSEC packet has invalid spi for destaddr=.....
