Hi, Requesting assistance regarding issue with overlapping subnetsI have two existing sites (Site A & B) and acquired an additional site (Site C)The issue is that Site C is overlapping with my existing Site B, both have the same subnet 192.168.2.0/24...
Hi,Can anyone help with issue below? I have two sites:Site A has an L3 Switch that is running BGP and OSPF. It has two routers: R1 is running BGP and R2 is running OSPF. Both routers are using HSRP, R1 being the active router.Site B has an L2 switch,...
Thank you for your replyYes, Both Site B & C have resources that needs to be reachable.Do you mean to use 1:1 Static NAT to translate Site C subnet 192.168.2.0/24 to another subnet (ex: 192.168.3.0/24). Then advertise the 192.168.3.0/24 to BGPTherefo...
Yes, when B_R2 is still the standby router it still has route to the destination device. It can also reach the destination device using its core facing interface as the source.B_R2 just doesn't forward the traffic, is that a characteristic of a HSRP ...
Just made some changes to your sample configuration for B_R1. See below: track 1 list boolean and object 2 object 3track 2 interface Fa1/0 line-protocoltrack 3 ip route 10.10.10.0 255.255.255.0 reachability I used 10.10.10.0 cause if I used 192.168.2...
