About jmorton1

Cisco Umbrella Switching to Admin User · 03-29-2024

Has anyone else ever had someone's Cisco Secure Umbrella Client switch to filtering as the device local admin account instead of these user? Hre is what I have seen occur at least 3 times now.WE have a user who is in a policy that allows social media...

jmorton1 · 02-22-2024

Is anyone else using ISE 3.3 as a Virtual Appliance in Microsoft Azure? We have been doing so for close to 5 months, and I think at least three times now, the VM has gotten to where it stopped responding and needed to be rebooted. In Azure, you see w...

jmorton1 · 02-02-2024

We are looking to implement wired 802.1X, but we would like to use a certificate to authenticate so that users do not have to authenticate, especially on desktops shared by staff. We tried to implement this using PEAP with EAP-TLS for the inner tunne...

jmorton1 · 01-12-2024

I am trying to import endpoints into ISE using the csv template under Context Visibility/Endpoints since we would like to have an explicit whitelist for allowed endpoints. I have the MAC addresses filled in as well as the IdentityGroup filled in, but...

jmorton1 · 12-13-2023

We have the Cisco ISE Virtual Appliance spun up in our Microsoft Azure tenant, and twice now, we have had the appliance go down and have to be rebooted after attempting an operational backup. It does not do this every time, but it has done it twice n...

jmorton1 · 02-05-2024

Thank you! After reading over what you wrote, I was able to figure out what needed to be done, and I now have a working solution. Here is what I did:In Group Policy Management, I went under Computer Configuration > Windows Settings > Security Setting...

jmorton1 · 02-05-2024

This has been observed n at least two different endpoints. I have tried without the server and hit an issue.

jmorton1 · 02-05-2024

Yes, the ISE cert is definitely signed by DigiCert since we must submit a request to them each year for that purpose. That certificate is used for all purposed except for SAML (it makes us use something else).As far as a computer certificate, the onl...

jmorton1 · 02-03-2024

I have been basically trying anything that would work, so PEAP with inner EAP-TLS was just a combination I had tried, and it did not work. I also have tried just using TLS and then specifying the certificate to use and the server, as well as not spec...

jmorton1 · 01-23-2024

Thank you! That was exactly the solution. We have it set up to use SAML for authenticating to the appliance, so when I changed it back to internal and used the local admin, it workd.

Member Since	‎04-29-2020 01:03 PM
Date Last Visited	‎04-16-2024 01:37 PM
Posts	42
Total Helpful Votes Received	10

User Statistics

User Activity

Cisco Umbrella Switching to Admin User

ISE 3.3 Hanging in Azure?

Wied 802.1X Using Certificate

Importing Endpoints into ISE - Error

Cisco ISE Going Doing After Operational Backup

Re: Wied 802.1X Using Certificate

Re: Wied 802.1X Using Certificate

Re: Wied 802.1X Using Certificate

Re: Wied 802.1X Using Certificate

Re: Importing Endpoints into ISE - Error