About Jeza-925

Jeza-925 · 10-06-2022

Hi guys,I'm having an issue with 5508 model. emWeb process is stuck on 100%, you can't access WLC over GUI, and ssh is very slow...(5508_WLC) >show process cpu---------------------------------- System CPU Process ---------------------------------Curr...

Jeza-925 · 06-07-2021

Hi all,Can somebody please help me understand what is being advertised from this router over ospf: !interface Loopback0description ConnectionToBranchip address 10.16.7.254 255.255.255.255!!router ospf 1redistribute static subnets route-map STATIC-PER...

Jeza-925 · 12-13-2020

Hi all,I ran into a problem with one of our sites. Corporate clients are using 802.1x for authentication. Problem is that clients can't connect on wifi. I first thought that problem is with DHCP and not getting IP address, but it might be authenticat...

Jeza-925 · 10-02-2020

Hi all,I'm facing strange problem with one of our sites, AP's are constantly disconnecting from WLC. They are associated for some time, than for some reason they disconnect and enter dtls loop process, they are stuck in loop for some random time (som...

Jeza-925 · 05-10-2020

Hi all, Cisco newbie here. I need some help about upgrading IOS on Cisco Catalyst 9407. We have two new chassis (c9400-sup-1xl with line card), they are still not connected with VSS, so they are two separated switches at the moment. They don't have a...

Jeza-925 · 03-10-2023

Hi Chris,This is a remote location, and the problem was with internet link that was terrible at the moment. I had to contact ISP to fix the issue.

Jeza-925 · 10-06-2022

Well not sure then what could be the problem... Can you post WLC error logs and also logs from AP? 8.3.143.0 is older version, did you consider upgrading to 8.5.171.0 / 8.5.182.0 ?

Jeza-925 · 10-06-2022

Hello,Based on your description and workaround, it seems you are having known problem with expired certificates. You can find more information on this link: https://www.cisco.com/c/en/us/support/docs/field-notices/639/fn63942.htmlBasically you need t...

Jeza-925 · 10-06-2022

Hi Ahmad,What is the model of 9800 controller and what is the software version? 2700 series is supported up to 17.4 version.

Jeza-925 · 10-06-2022

Hi Aydin,There is an Out-of-Box option, but in my experience this is not working as it should. Idea is that when AP first joins WLC, it will be placed with out-of-box radio profile and their radios will be set to admin down. When you move AP to diffe...

Member Since	‎05-10-2020 01:20 PM
Date Last Visited	‎03-10-2023 11:08 AM
Posts	14
Total Helpful Votes Received	10

User Statistics

User Activity

emWeb stuck at 100%

OSPF help

Client debug - connecting issue

CAPWAP State: DTLS Teardown

Cisco 9407 IOS upgrade

Re: CAPWAP State: DTLS Teardown

Re: Wireless Controller 2504 - Joining 2800 Series AP ISSUE**

Re: Wireless Controller 2504 - Joining 2800 Series AP ISSUE**

Re: 2700 AP not moving to 9800 WLC

Re: Change AP administrative mode to disabled right after First WLC jo