Hi all,Any idea about the traceback logs shown on my Cisco ASR1002x with IOS Version 16.6.4?I tried to decode the logs but I wasn't lucky enough! Traceback= 1#d9d4dba7684b22f94e3084f41efc5b74 :55D212EFB000+6DF98D9 :55D212EFB000+64C66C0 :55D212EFB000...
Dear All,
Hi,
According to the attached file, I have run a VPLS base network which my clients connect to the BRASs through PPPoE connection.I have an issue on my VPLS-PE-2 router, when I connect my BRASs directly to the VPLS-PE-2, my PE-2 doesn't lea...
Hello dear colleagues,
Is there any way to configure "switchport vlan mapping default drop" on cisco 6800 interfaces? or any alternative solution for this case? my interface configuration is shown below:
interface TenGigabitEthernet7/28switchport ...
Hi Dear All,
I want to filter the RA packets by using IPv6 nd raguard feature, when I try to create a policy with this command "ipv6 nd raguard policy TEST" it gives me this message: "Service not enabled"
does anyone know which feature or service exa...
Hi,
I need help to understand the exact meaning of "Mac Etype/Proto CAM" in my show hardware capacity forwarding command on Nexus 7700? there are 11 in used but I don't know what are they? The picture of my show command is attached.
Thanks
Hello Georg,Of course the 6800 series support both of mentioned features and it's working fine right now, but my issue was about limiting the number of vlans by using "trunk allowed vlan" command under interface, and I found the solution as well, I d...
Our host servers are connected to a Nexus 5K and we have a VPC link between 5K and 7K, AFAIK it's not possible to attach raguard policy under vpc link and also I couldn't find any document regarding filtering RA packets on NEXUS 5K so I decided to ...
Hello Peter,
Thanks for your quick response, I enabled the fhs feature and created the policy but it's seems there is no chance to assign the policy under interface vlan, according to our topology I need to filter RA packets on the vdc except vdc adm...
Hello again and thanks for your quick response, I would like to know that is it essential to care about this used number(Mac Etype/Proto CAM 11(Used) 3(Free) 78.57(Percent) ) and is it vital or is just for informing ? also the out pu...
