About BobGreer65666

BobGreer65666 · 11-01-2023

Hi there,Thanks for reading!I'm seeing an oddity when trying to join a laptop to an SSID in PT. The problem is in the UI where I set configuration for Wireless0 nic. When I select an authentication type, the cursor jumps to the WEP password field a...

BobGreer65666 · 02-08-2023

Hi there,Thanks for readingI'm trying to set up a PRIV SNMPv3 config on a C9200 running 17.6.3 to allow connection to our Solarwinds server. Debugging leads with an "Unknown Engine ID" error. I'm able to see the local engine ID but suspect that I n...

BobGreer65666 · 11-01-2022

Hi there,Thanks for reading.I recovered a c9200l running 16.09.04. I write erased successfully. Verified the switch stack consisted of 1 single member (itself). I then ran install add file usbflash0:cat9k_lite_iosxe.17.06.03.SPA.bin activate commi...

BobGreer65666 · 11-18-2021

Hi there,Thanks for reading!What's your opinion/experience/thoughts on the Catalyst 1000 platform? I have a VERY small branch where I'm thinking to deploy 16 GigE ports with PoE. Sixteen ports gives the branch room to grow (right now, they have 6 po...

BobGreer65666 · 09-11-2021

Hi there,Thanks for reading.This is an extension of a recent query I had: IP SLA - TRACKING - ISPs. I have a new Internet circuit for my small network. I have two hub sites in the private LAN with a core switch at each location. The main site Exec ...

BobGreer65666 · 11-03-2023

Thanks for pointing out the samples. Seems there's a LOT to choose from. For clarity, I was trying to configure 802.1x but the cursor would jump to WEP password. Pretty sure I was running into a bug. Moving on... thanks again!

BobGreer65666 · 02-09-2023

Thanks! That page had this one embedded: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/snmp/configuration/xe-3e/snmp-xe-3e-book/nm-snmp-snmpv3-comm-supp.html which had this command (which configs the engID for remote user):Example:Device(config)...

BobGreer65666 · 02-08-2023

Here's the config:snmp-server group acpsnmp v3 privsnmp-server host 192.168.20.35 version 3 priv acpsnmpSID-000_TEST-SW1(config)#do show snmp userUser name: acpsnmpEngine ID: 8000000903006C310ECB8B00storage-type: nonvolatile activeAuthentication Prot...

BobGreer65666 · 11-01-2022

Hi guys,Thank you both for replying.I was able to bundle-mode boot from USB. I was then able to copy the bin into flash and re-run the install command successfully. The switch is un-bricked and ready for a new config & deployment.

BobGreer65666 · 09-14-2021

Hi Georg,The exec FW is a Sophos XG310 and doesn't have an equivalent to 'show run' (damitol).

Member Since	‎06-09-2020 09:12 AM
Date Last Visited	‎12-05-2023 08:51 AM
Posts	45
Total Helpful Votes Received	20

User Statistics

User Activity

Packet Tracer bug?

SNMPv3: Unknown Engine ID

c9200l install add failed; boot to rommon

Catalyst 1000 platform

Unexpected route

Re: Packet Tracer bug?

Re: SNMPv3: Unknown Engine ID

Re: SNMPv3: Unknown Engine ID

Re: c9200l install add failed; boot to rommon

Re: Unexpected route