About Salehzwy60270

Salehzwy60270 · 07-28-2020

I cannot route out inside vlan to outside interface, it give route unreachableany help will much appreciate it.all interfaces are up, outside interface can ping to outside. Config as shown below!!interface GigabitEthernet0/0/0ip address 172.16.10.254...

Salehzwy60270 · 06-11-2020

when connect using anyconnect, im unable to access other remote networklocal network 172.16.10.0/32remote site 10.0.0.0/16

Salehzwy60270 · 07-31-2020

Thanks for your replyI took the same router to my home lab with same network topology and it worked just fine!!!!Does this mean cabling issues?

Salehzwy60270 · 07-30-2020

Will do your solution 2moro, but keep in mind that this config is exactly copy and past from previous failed 2900 router, that was working just fine, but when copied this config into new 4221 router all stopped working.Altough Vlans can ping their re...

Salehzwy60270 · 07-28-2020

Can you elaborate more regarding nat statement?

Salehzwy60270 · 07-28-2020

Even adding this wint fix the main issue

Salehzwy60270 · 06-14-2020

anyconnect------>local network------------>site-to-site vpn172.16.10.50---->172.16.10.0/24---------->10.0.0.0/16 access-list split-tunnel standard permit 172.16.10.0 255.255.255.0access-list split-tunnel standard permit host 0.0.0.0

Member Since	‎06-11-2020 02:57 AM
Date Last Visited	‎08-16-2020 10:15 AM
Posts	8

User Statistics

User Activity

classical router-on-a-stick setup with VLANs cannot route outside

access-list split-tunnel

Re: classical router-on-a-stick setup with VLANs cannot route outside

Re: classical router-on-a-stick setup with VLANs cannot route outside

Re: classical router-on-a-stick setup with VLANs cannot route outside

Re: classical router-on-a-stick setup with VLANs cannot route outside

Re: access-list split-tunnel