Hi colleagues, my IOS-XE Routing and Switching devices configured for "Smart Licensing Using policy" communicate directly with CSSM, which is smartreceiver.cisco.com. As I'm securing my devices with an Infrastructure ACL, I'm wondering if there is an...
Hello community,
I have a Cisco Catalyst 2960-S stack with 2 members with IOS 15.2(2)E8 and an RPS2300 with two 750W power supplies connected to it. All works fine, in the CLI the RPS is recognized and is backing up without problems. I just have on...
Hello,
we have a Cisco CME 11.0 system with IOS 15.6(1)T2, and since some time we are seeing the following log message:
%VOICE_IEC-3-GW: C SCRIPTS: Internal Error (No dialpeer match): IEC=1.1.128.11.5.0 on callID XXXXXXX GUID=XXXXXXXXXXXXXXXXXXXXXX...
Hi All,
we want to use CUCME and the Cisco IP Phone 7800 Series in combination with B-ACD.
As far as I can see, the IP Phones 7800 are SIP only, no SCCP. However, B-ACD is a SCCP only feature in general.
But there is a feature list which shows that ...
Hi,We have lots of Cisco IOS devices (2800/2900 routers and some 3750 Catalyst switches), and need to secure them against NTP reflection attacks.Actually, there are 2 kind of attacks:NTP Mode 7 query for MONLISTNTP Mode 6 query for READVAR *)While mo...
Hello Georg, the iACL is used as a Control Plane Protection, it is not about blocking specific websites. It is just a whitelist to permit specific IPs TO the device (like NTP server, specific management subnets, specific BGP neighbors, ...) and drop ...
Hello Georg,thanks for your reply. Unfortunately this is only applicable to legacy "Smart Licensing", not to "Smart Licensing Using Policy". "SLUP" uses"smartreceiver.cisco.com" instead of "tools.cisco.com", and it seems that "Smart Licensing Using P...
Hello Balaji, no, as I mentioned my devices are connecting directly to the Cisco Cloud, which is https://smartreceiver.cisco.com/licservice/license. There is no on-premise VM. "SL Using Policy" needs to push license reports to the Cisco Cloud, and ne...
