Cisco WLC 2504 with version 8.5.151.0. one of my branch offices suddenly lost wireless, and around 10 mins later, partially recovered. but some area still didn't see any SSID. checked the controller and found 3 APs didn't join the controller. they ar...
after creating a new WLAN, I get the connection to that SSID, get the right IP address, and can go to the internet, and intranet, but couldn't SSH or HTTPS to the WLC. it is pretty weird, any one has any idea about this? thanks in advance.
Hi all my friends, right now I'm configuring Tacacs+ for ASA, just meet a problem. when I configure the same part in Switch, I used a command "ip tacacs source-interface vlan 224" to control the traffic from switch to Tacacs+ server, Question here is...
Dear Friends, I am facing a problem, please help me here. I configured anyconnect VPN on ASA 5508-x. ASA inside interface ip address is 10.16.5.20/24, there is route " route inside 10.0.0.0 255.0.0.0 10.16.5.1" that is the SVI of Vlan 5 in core S...
we have a Nexus C93180YC-FX Switch, when I ssh to it, I directly get Privileged EXEC mode #, didn't see User EXEC mode ">". there is no AAA, and I enabled secret. who can help me with this issue ? thanks.
@ Rob Ingram thanks a lot, I understand better, but there is an issue, right now I couldn't ping 10.16.5.20 the inside interface of ASA. I could ping other IP addresses in the same subnet like 10.16.5.10. I mean when I log in to VPN and get IP addre...
