As far as forwarding discontiguous ports, each port will need its own custom service.There are two locations port forwarding can be done in: Firewall > Access Rules, and Firewall > Port Forwarding. The Port Forwarding page would be more accurately la...
This should not be necessary. The RV220W should send out the ARP messages for the WAN IP and each configured 1-1 NAT IP address to let the upstream ISP devices know that the RV220W is using those IP addresses. If you are not getting any ECHO Replies ...
Hello Brad,I am with the Cisco Small Business Support Team. I have been unable to replicate your issue with an identical router with the same firmware (I also tested with 1.3.13.02). It does not seem you have a configuration issue. I matched your set...
Please give us a call at 866-606-1866 and speak with the next available engineer so that we can provide you immediate assistance. We are open 24 hours a day, 7 days a week, including holidays.
One work around that some of our engineers have found from testing that has worked from *SOME* Windows 7 64x is installing the Microsoft Visual C++ 2005 Redistributable Package (x64). As far as I know this has not worked on all Windows 7 64x mac...
