Hello Everyone, I was hoping maybe someone could help me understand the behavior of an issue I'm having with VSS Failover. Currently I have two 6504's setup for VSS with one connection to the sup engine (10Gig__Connection) and the other con...
HelloI was hoping maybe you answer this for me, If I setup a vpc between my core 5596 and my dsw 5548 with all the svi's created on the 5596. Should I be able to ping my svi's that I created on the 5596 from inside the 5548's? If so what must be conf...
HelloThe first thing I will do is below:Establish a baseline test plan to see what is working before proceeding Nexus 5K1) feature vpc2) Create a VPC Domain between the 5K's3) Establish the VPC-Keepalive, use the mgmt interface4) Once the Keepalive ...
This is what I see when I rollback:NOC-SW-FWISLAB-5596-1# rollback running-config checkpoint checkpt1 Collecting Running-ConfigGenerating Rollback patch for switch profile..Rollback Patch is EmptyNote: Applying config parallelly may fail Rollback ver...
HiJust wanted to let you know the following:Create to new vlansCreated checkpoint did a no vlan (for both new vlans)Performed a rollbackAfter this again my vlan's were back in the running-config like it was before I deleted them.Hope this helps and ...
Hello I just created a checkpoint within my nexus lab to see if my svi's will still be there after I rollback to that check and they were there. I only have have two SVI's and two Port-Channel and they both were there in my running-config. So my an...
