About D06101957

D06101957 · 08-06-2013

I need to know the command for setting the power levels on the switch ports of a 2960 Catalyst POE switch. It is running Version 12.2(55)SE5 IOS. Thanks, Dennis

D06101957 · 02-12-2013

I have a 24 port 2960-S that is not communicating with a 2960-LST that it is directly connected to over fiber. The link is up on the LST but will not come up on the -S. What command should I use to bring up this link? I have tried no shut from the...

D06101957 · 11-16-2012

I am trying to convert two Aironet 1141n access points to autonomous stand-alone units. I have connected the console cable and I can see the unit giving information in the console window, but I cannot type any commands. When I try to get the unit t...

D06101957 · 08-06-2013

Thanks guys, I think I have it now. When I do a #show power inline, all the ports say auto. When I plug something in and the port light goes green and I do a #show power inline, it will read auto on all ports except the one where it has something ...

D06101957 · 02-12-2013

Here they are.2960-S:sh runBuilding configuration...Current configuration : 3360 bytes!version 12.2no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname BandCam!boot-start-mar...

D06101957 · 11-20-2012

Okay. Problem solved...sort of. I still cannot type any commands in through the console connection. BUT, I noticed that the tftp server was 32 bit and my system is 64 bit. I changed servers, connected an AP and VIOLA! IT FREAKIN' WORKS! Okay, ...

D06101957 · 11-18-2012

Scott, they are NOT autonomous. I want to convert them to autonomous. This is what I am havving problems with. I cannot enter commands, and I do not know if that is from the aps being lightweight or some problem with my connection. Yes, I am cons...

D06101957 · 11-17-2012

Scott, I cannot enter any commands. I can see the output from the ap on the console window. But I cannot type anything when I try. What would cause this?

Member Since	‎11-16-2012 05:49 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	12

User Statistics

User Activity

set power levels for POE

2960-S to 2960-LST config over fiber

WAP Times Out TFTP Server

set power levels for POE

2960-S to 2960-LST config over fiber

Re: WAP Times Out TFTP Server

Re: WAP Times Out TFTP Server

Re: WAP Times Out TFTP Server