About D-N

D-N · 09-12-2012

HelloRecently I've been looking into posibilities for extending a DMVPN (already implemented) with very small (1-2 user) remote locations over a single ISP link.I would like to use what is basically the smallest Cisco router that supports DMVPN and E...

D-N · 08-01-2011

HelloI am trying to setup a GETVPN network. The idea is to encrypt all GRE traffic between peers (for DMVPN use). Also, there can be no dedicated KSs (no extra routers that can handle this).The VPN is brought up successfully with only one KS. However...

D-N · 04-29-2011

I'm currently using LMS 3.2 and would like to integrate it via TACACS+ with an ACS 4.2.I hope this is the right place to ask my question.I encountered a problem while configuring AAA mode in LMS: after setting "AAA Mode Setup" to ACS (instead of non-...

D-N · 04-21-2011

I am having trouble with the password recovery procedure on a CiscoWorks 3.2 installation. The problem is that I've no idea what software versions are running (never kept track).I tried following the steps here: http://www.cisco.com/en/US/products/sw...

D-N · 10-22-2008

Hello Does anyone know if there are any Cisco Wireless-N(draft1.0 or 2.0) client adapters available (USB/PCMIA/PCI)?ThanksDorian

D-N · 09-04-2013

I know it makes no sense (dhcp relay and dhcpd cannot coexist), but it worked for me (~20 iOS devices). Check out bugID CSCuh79288 if you have access.

D-N · 09-04-2013

Yeah, found the fix just after the last reply to you.

D-N · 09-04-2013

Problem solved. Long live google search on Cisco.com.There are several workarounds:- Move the DHCP server function to another device like a WLC or a router.- Downgrade the ASA to 9.1.1 or lower. - Moving the device to the wired network seems to not t...

D-N · 09-04-2013

You're on a wrong track.As you can see from the (full) output, the "order of messages" isStep 1: Client -> ASA = DHCPDISCOVERStep 2: ASA -> Client = DHCPOFFERStep 3: Client -> ASA = DHCPREQUESTStep 4: ASA > Client = *For a working client, Step 4 resu...

D-N · 09-04-2013

That's not correct.Look above at output #1 (non-working Apple iPhone):(snip)DHCPD: unicasting BOOTREPLY to client 6cc2.6b29.3b89 (10.10.15.205).DHCPD: Binding successfully deactivateddhcpd_destroy_binding() removing NP rule for client 10.10.15.205DHC...

Member Since	‎08-01-2006 10:56 PM
Date Last Visited	‎10-06-2023 01:04 AM
Posts	32
Total Helpful Votes Received	4

User Statistics

User Activity

Smallest Cisco 800 series + DMVPN?

GET VPN w/o dedicated KS - COOP KS splitting

LMS 3.2 unable to validate ACS server connection

How to reset the password on a Windows-based CiscoWorks LMS 3.2?

Cisco Wireless-N Client Adapters?

Re: Apple iOS devices can not get IP from ASA

Re: Apple iOS devices can not get IP from ASA

Re: Apple iOS devices can not get IP from ASA

Re: Apple iOS devices can not get IP from ASA

Re: Apple iOS devices can not get IP from ASA