Hi folks, I'm seeing this command on an interface and trying to understand it's function: interface GigabitEthernet0/0/0ip address x.x.x.x 255.255.255.252ip nat outsideip access-group vpn_in inload-interval 30negotiation autocrypto map VPNend---There...
Thanks but actually it is working. This particular site has a FW between this router and the internet which all the other sites do not so I wasn't aware. The FW was dropping the udp500 packets. Thanks again all. Also the other router does actually ha...
Hey thanks, I'm 100% certain that the config is good. I've deployed the same config on the other router and it works.The only difference is this "crypto map xxx" statement on the egress interface. I was really just asking if anyone knew the exact pur...
Thanks, The other device also has policy-based VPN's and route-based VPNs working over the same interface. On this route router I have route-based VPN's configured also but they won't come up. I was wondering what this interface statement did because...
Hey Mahadev,I recommend that you start a new thread on this. You'll get more input from the rest of the folks here this way and right now I have limited time. Try explaining this in terms of packet flow with a specific example. Also if you post your ...
Hi Mahadev,From the little info you gave here it look like you've created yourself a nice layer2 loop. I don't think this is related to the thread so if you want more advice I suggest you create a new one if what I'm saying here doesn't help you.If w...
